Home / Shutter Count Guide / Canon 100D

Canon 100D Shutter Count

Can you check it, which software build to use, and what counts as a healthy number (known as the Rebel SL1 · Kiss X7 in some regions).

✔ Yes — you can read the shutter count on the Canon 100D.
Use the SDK 2.14 subversion of EOS Digital Info v1.4 (the one labelled “Legacy”). Connect the camera via USB, click Connect, and the actuation count appears instantly.

Camera	Canon EOS 100D (known as the Rebel SL1 · Kiss X7 in some regions)
Processor	DIGIC 5
Canon’s shutter rating	100,000 actuations
Released	2013
Recommended build	SDK 2.14 (“Legacy”) — reads shutter count

How to check the shutter count on a Canon 100D

Download the right build. Get the SDK 2.14 (“Legacy”) subversion of EOS Digital Info v1.4 from our download page.
Connect via USB. Camera off, connect USB, turn on. Close Canon EOS Utility, disable Wi-Fi/NFC if present.
Read the count. Run as Administrator, click Connect — the actuation count appears next to the camera model.

What is a good shutter count for the Canon 100D?

Canon rates the 100D’s shutter for 100,000 actuations. As a rule of thumb: under 50,000 is low, 50,000–100,000 is normal for used, over 100,000 is high — budget $200–$400 for a replacement.

Buying a used Canon?

Check the shutter count before you pay — then buy where used gear is graded and returnable:

Browse used Canon at KEH Browse used Canon at MPB Used Canon DSLRs on eBay

Disclosure: these are affiliate links — we may earn a commission at no extra cost to you.

Canon 100D shutter count — FAQ

Does the shutter count show in the photo EXIF?
No. Canon does not write the actuation count into EXIF. You need a USB-connected tool.

Will checking the shutter count harm my camera?
No — reading the count is a read-only operation over USB.